ShelterLogic 25730 Manuel d'instructions télécharger pdf (Page 4)

05-25730-0EPage 4

Extension

Panel

12082

Interior View Extension Panel Setup

1. ATTACH SIDE WALLS TO FRAME

NOTES:

• Canopy extension panels attach to frame cross rails with bungee cords.

• Leave Canopy Cover bungees in place when attaching extension panels.

• Extension panels will not allow the canopy cover TwistTite mechanism to properly tighten the cover

when extended. An alternate TwistTite Clamp system is included with this kit and shown in Step 5.

A. If tightened at corner leg poles, disengage the TwistTite

™

cord and “S” hook from canopy cover and corner

legs. Wrap up TwistTite

™

cord and secure inside the shelter with one of the cover panel bungee cords.

B. Attach the extension panels with bungees to the cross rails at the top rst. Adjust the panels as needed to

ensure a tight and even t before extending panel and securing to the tent poles.

CAUTION: Bungee Cords are under extreme tension. Use Caution when installing. Safety glasses are

recommended to prevent injury.

2. ASSEMBLE EXTENSION PANEL TENT POLES

3. RAISE EXTENSION PANELS AND ATTACH TENT POLES

1045810459

Insert Bungee Cord Through Grommet

Top of Extension Pole

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

ShelterLogic 25730 Manuel d'instructions Page 4